The Tech 2 Flash is the same tester GM Technicians use to diagnose GM
vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides
support for on-board diagnostics on all GM systems 1992 thru 2008!
Features:
Authentic GM software in the Tech 2 Flash means the most comprehensive
diagnostic software available for late model GM vehicles.
Support for on-board diagnostics on all GM systems 1992 thru current year.
Removable hardware modules provide insurance against scan tool
obsolescence.
Large, easy-to-read backlit screen
RS232 & RS485 ports provide the avenue to connect future devices to your
Tech 2 Flash.
Ability to capture stored DTCs, Freeze Frame, and Failure Record for later
review.
Ability to view the status of vehicle diagnostic tests as they run.
Raised tactile keys, clearly labeled, mean no mistaken keypunches.
Bi-directional
The authentic GM 1992-current year software will provide full bi-directional
control when performing powertrain, chassis, and body diagnostics.
Tech 2 Kit Includes:
Tech 2 Flash Tester
32 MB PCMCIA Card with GM OE Applications
Data/Sensor/Trouble Code Manual
DLC Cable, DLC Loopback Adapter
12V Cigarette Lighter Power Cable
SAE 16/19 Adapter
NAO 12/19 Adapter
Battery Power Cable
Storage Case
Tech 2 Users Manual
Tech 2 Flash Registration Card
An
industry change in protocol from OBD II
to Controller Area Network (CAN)
has
begun. In order to perform diagnostics
on a vehicle that uses the CAN
interface,
you will need the Tech 2 Flash and a CAN
diagnostic interface module.
The
CANdi module connects between the Tech 2 Flash’s
diagnostic link cable and the OBD adapter.
Once the CANdi
module is connected, it can be used on
all GM vehicle applications, even
those vehicles using other platforms such
as OBD I and OBD II.
Includes the CAN
diagnostic interface module and instruction
sheet.
The following GM
vehicles utilize the CAN interface:
